Table of Contents
Advertisement
off to lessen the burden on the
vehicle electrical system.
Low-wattage electrical accessor-
ies might not be recognised
by the vehicle's electronics. In
such cases, power sockets are
switched off very shortly after the
ignition is turned off.
Cable routing
Note the following with regard to
the routing of cables from sock-
ets to items of electrical equip-
ment:
Make sure that cables do not
impede the rider.
Make sure that cables do not
restrict the steering angle or
obstruct handling.
Make sure that cables cannot
be trapped.
https://www.motorcycle-manual.com/
Cases
with aluminium case
Open cases
Turn key 1 anticlockwise.
NOTICE
The case lid can be opened at
either the left or the right latch.
Push the lock housing 2 up-
wards to unlock the latch 3.
Pull the latch 3 to the rear and
open the lid.
Closing cases
OA
Close the case lid.
Position latch 1 on the lid.
Push the lock housing 2 down,
ensuring that the latch engages
in the lid.
Turn key 3 clockwise and with-
draw to lock the lock.
Removing case lid
Open cases (
11
235
z
235).
Advertisement
Table of Contents
