Table of Contents
Advertisement
4
112
with Connectivity
The selection arrow 4 appears
on the display.
z
The selection arrow 4
disappears after the status is
changed.
with Connectivity
The following settings are avail-
able:
Road: Damping for comfort-
able on-road mode
Dyna.: Damping for dynamic
on-road mode
Enduro: Damping for off-
road mode. Only available in
ENDURO or ENDURO PRO rid-
ing modes and can also not be
adjusted further in these riding
modes.
with Connectivity
A message is displayed if a set-
ting is not possible in the riding
mode selected. Example: In
ENDURO riding mode damp.
not adjustable.
OE
OE
To adjust spring preload:
Start the engine (
Repeatedly press and hold but-
ton 1 until the setting you want
to use appears on the display.
https://www.motorcycle-manual.com/
NOTICE
You cannot adjust spring preload
while the motorcycle is on the
OE
move.
The following settings are avail-
able:
One-up
One-up with luggage
Two-up (with luggage)
with Connectivity
The following message is
displayed if it is not possible
to adjust a setting: Load
adjustment only avail.
stopped.
167).
OE
Advertisement
Table of Contents
