Table of Contents
Advertisement
10
216
Remove axle nut 4 and
washer 5.
Remove chain tensioner 6 and
push the axle in as far as it will
z
go.
Remove quick-release axle 7
and remove chain tensioner 8.
Roll the rear wheel as far
forward as possible and
disengage chain 9 from the
sprocket.
https://www.motorcycle-manual.com/
Roll the rear wheel back until it
is clear of the swinging arm.
NOTICE
The sprocket and the spacer
bushes on left and right are loose
fits in the wheel. Make sure that
these parts are not damaged or
get lost on removal.
Installing the rear wheel
WARNING
Use of a non-standard wheel
Malfunction as part of ABS and
ASC control interventions
See the information on the ef-
fect of wheel size on the ABS
and ASC systems at the start
of this chapter.
Advertisement
Table of Contents
