Replacement Of Plasmacluster Ion Generating Unit - Sharp IG-CL15UW Operation Manual

REPLACEMENT OF PLASMACLUSTER ION GENERATING UNIT

Plasmacluster Ion Generating Unit
Model
IZ-CCL5U
* Before replacing the Plasmacluster Ion Generating Unit, be sure to turn off the main unit,
unplug the power cord, and never handle the plug with wet hands.
1
Remove the filter.
2
Remove the screw by using a coin
with a similar-size coin head or a
screwdriver, and the Plasmacluster
lon Generating Unit.
Cleaning Brush Plasmacluster Ion
Generating Unit.
<For Disposal>
Please dispose the used Plasmacluster Ion Generating Unit according to any local laws and
regulations.
-materials-
• Case : Acrylonitrile Butadiene styrene (ABS)
• Unit : Polybtutylene Terephthalate (PBT), Electric parts.
3
Replace the new Plasmacluster
Ion Generating Unit.
Fix it into the main unit firmly.
* After replacing the Plasmacluster Ion
Generating Unit, fill the replacement date
on the Date Label at the side of the main
unit.
Screw
E-
FILTER INSTALLATION
Push the right side
of the filter in order
of
each tab securely.
ATTENTION
2
The Plasmacluster
Ion Generator might
not work correctly if
filter is not properly
1
attached.
, and lock