Plasmacluster Ion Generating Unit; Plasmacluster Ion Generating Unit Replacement - Sharp IG-CL15UW Operation Manual

CLEANING AND MAINTENANCE

PLASMACLUSTER ION GENERATING UNIT

Every 6 months or more often if necessary
* When cleaning the Plasmacluster lon Generating Unit, be sure to turn off the main unit,
unplug the power cord, and never handle the plug with wet hands.
See page E- for directions on how to remove and install the Plasmacluster Ion
Generating Unit when cleaning.
Remove dust of the needle electrode by using the cleaning brush.
Cleaning Brush
*NEVER TOUCH the connector terminal of Plasmacluster Ion Generating Unit.

PLASMACLUSTER ION GENERATING UNIT REPLACEMENT

In order to release Plasmacluster Ion stably, periodical replacement of Plasmacluster
Ion Generating Unit is necessary.
The Unit Replacing Light lights up as a reminder for replacement.
Elapsed Time
Approx. 2 years.
(Approx. 7,500 hours)
Approx. 2 years and 2
months.
(Approx. 9,000 hours)
* Usage environment affects the lifetime of the Plasmacluster Ion Generator.
The Plasmacluster Ion Generator may stop operating before estimated lifetime.
In this case, press Mode button again and restart.
If this does not help, replace with a new Plasmacluster Ion Generating Unit.
Display
Flashing(red)
Flashing faster(red)
E-0
Electrode Section (4 points)
Connector Terminal
Message
Suggest replacing
Plasmacluster Ion
Generating Unit.
• Unit stops operation.
• Replace the
Plasmacluster Ion
Generating Unit.