Table of Contents
Advertisement
DESCRIPTION OF PRODUCT
Parts description (See FIG.A)
1.
Spray gun
2.
Gun holster
3.
Water intake
4.
ON/OFF switch
5.
High pressure hose
6.
Hand cranks
7.
Carrying handle
8.
Detergent bottle
9.
Needle
Check the delivery parts (See FIG.B)
Remove the machine from its packaging carefully and make sure that the following parts are
present:
a.
Hand cranks
b.
Gun holster
c.
High pressure washer
d.
Detergent bottle
e.
Spray gun
f.
Nozzle
g.
Coupling element for water connection
h.
User manual
WARNING: If any parts are damaged or missing, do not operate this tool until these
parts are replaced. Failure to heed this warning could result in serious personal
injury.
NOTE: Always recycle the packaging in accordance with local recycling guidelines.
20
INSTALLATION
WARNING: Pull out mains plug before carrying out any work on the equipment and
use only original parts.
Before starting any cleaning task, it is important to inspect the area for objects
that could create a hazard. Remove any objects from the work area that could be
tripped over, such as toys or outdoor furniture. Ensure that all doors and windows
are closed tightly.
Attach hand cranks. (Fig. C)
Fix hand crank onto the hose reel.
Assemble gun holster and cord bracket. (Fig. D)
Assemble the gun holster onto pressure washer.
Connect the hose and spray gun.
Install the high pressure hose firmly onto the spray gun. (Fig. E)
1. Press and hold the button near the trigger.
2. Insert the high pressure into the spray gun.
Then install the tip lance and selected nozzle onto the spray gun. (Fig. F)
Assemble inlet adapter. (Fig. G)
Attach the inlet adapter to the machine's water inlet. Hand tighten only.
Connect garden hose and inlet adapter. (Fig. H)
Attach a hose with a quick connect coupling (not included) to the high pressure washer.
Connect to water supply (Fig. I)
In keeping with current regulations a pressure washer must never be operated
from the drinking water mains supply without a controllable backflow preventer. A
suitable backflow preventer in conformity with EN 12729 type BA must be used.
Water that has passed through a backflow preventer is classified as undrinkable.
NOTE: A backflow preventer is available from specialist retailers.
Attach garden hose to water supply and turn water valve on fully on position.
Connect socket. (Fig. J)
Insert the mains plug into the socket.
21
Advertisement
Table of Contents
