Table of Contents
Advertisement
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1.
Spray gun
2.
Gun holster
3.
Water intake
4.
ON/OFF switch
5.
High pressure hose
6.
Hand cranks
7.
Carrying handle
8.
Detergent bottle
9.
Needle
Check the delivery parts (Fig. B)
Remove the machine from its packaging carefully and make sure that the following parts are
present:
a.
Hand cranks
b.
Gun holster
c.
High pressure washer
d.
Detergent bottle
e.
Spray gun
f.
Lance
g.
High pressure nozzle
h.
Turbo nozzle
i.
Coupling element for water connection
j.
User manual
k.
Triangle brush
l.
inlet adaptor
m.
Patio Cleaner
n.
Extension lance
o.
Rotary brush
WARNING: If any parts are damaged or missing, do not operate this tool until these
parts are replaced. Failure to heed this warning could result in serious personal
injury.
NOTE: Always recycle the packaging in accordance with local recycling guidelines.
20
INSTALLATION
WARNING: Pull out mains plug before carrying out any work on the equipment and
use only original parts.
Before starting any cleaning task, it is important to inspect the area for objects
that could create a hazard. Remove any objects from the work area that could be
tripped over, such as toys or outdoor furniture. Ensure that all doors and windows
are closed tightly.
Attach hand cranks. (Fig. C)
Fix hand crank onto the hose reel.
Assemble gun holster and cord bracket. (Fig. D)
Assemble the gun holster onto pressure washer.
Connect the hose and spray gun.
Install the high pressure hose firmly onto the spray gun. (Fig. E)
1.
Press and hold the button near the trigger.
2.
Insert the high pressure into the spray gun.
Then install the tip lance and selected nozzle onto the spray gun. (Fig. F)
Fitting the wash brush (FIg. G)
The wash brush is suitable for cleaning surfaces delicately.
In the process, the high-pressure jet is used to operate the wash brush; the water strikes the
surface to be cleaned only at lower pressure.
The rotating wash brush head achieves the cleaning effect and the removed dirt is washed
away with the water.
1.
Put the wash brush onto the spray gun.
2.
To fix the wash brush, push it slightly downwards and turn it clockwise at the same time.
Fitting the Patio cleaner (FIG. H)
- Push the extension tube onto the pivoting connector of cleaner, then rotate to the fixing
position.
NOTE: Before operation, make sure no obstacle (etc. stone) has blocked the rotation device
below.
-
When cleaning horizontal surfaces, move nozzle wand from side to side.
-
When cleaning building interiors or exteriors , work from top to bottom. This will help
eliminate streaks.
21
Advertisement
Table of Contents
