Table of Contents Introduction Features Package Contents Specifications Operation Controls and Functions Application Example Thank you for purchasing this product Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this prod- uct.
Page 3
Registration Page Please Activate your warranty by registering our product through the link below - www.orei.com/register Technical Support Need Help? Our experienced Technical Support Team is here for you to answer your questions, give technical advice or help troubleshoot your project to get you installed on time and on budget.
Introduction This 18Gbps HDMI over COAXIAL Extender can extend HDMI video and audio signals up to 328ft / 100m via a single coaxial cable. Video resolution is up to 4K2K@50/60Hz 4:4:4. The Extender supports audio embedding and de-embed- ding function. It is equipped with bi-directional IR pass-through, allowing users to send IR control up to a distance of 328ft / 100m, making IR control possible without any additional wires.
Features HDMI 2.0 and HDCP 2.2 compliant Support 18Gbps video bandwidth Support video resolution up to 4K2K@50/60Hz 4:4:4 Bi-directional IR with IR Adapter Cable to connect to control systems Support audio embedding / de-embedding function Up to 5.1-channel audio supported including Dolby Digital, DTS, and PCM.
Operation Controls and Functions Transmitter Panel POWERL INKI NPUT OUTPUT HDMI LINE SERVICE AUDIO EDID RECEIVER FLASHER COAX OU T HDMI OU T HDMI IN LINE IN DC 12V Name Function Description POWER LED Blue LED indicates that the Transmitter is powered on. •...
Page 9
Operation Controls and Functions Name Function Description Used to switch the audio source (HDMI IN or LINE IN) for the HDMI OUT port and the AUDIO OUT port. Switch to “HDMI”: The HDMI OUT port and the AUDIO OUT port outputs the audio de-embedded from the HDMI IN port. AUDIO DIP Switch to “LINE”: The HDMI OUT port and the AUDIO OUT switch...
Page 10
Operation Controls and Functions Receiver Panel POWER LINK OUTPUT SERVICE RECEIVER FLASHER COAX IN HDMI OUT AUDIO OUT DC 12V Name Function Description POWER LED Blue LED indicates that the Receiver is powered on. • Light on: Transmitter and Receiver are in good connection status. LINK LED •...
Page 11
Operation Controls and Functions IR Pin Definition IR Receiver and Blaster pin’s definition as below: IR BLASTER IR RECEIVER IR BLASTER IR Signal (Tip) (20-60KHZ) Grounding (Ring) IR RECEIVER IR Signal (Tip) (20-60KHZ) Grounding Power 12V Note: When the angle between the IR receiver and the remote control is ± 45 °, the trans- mission distance is 0-5 meters;...
Application Example RECEIVER FLASHER COAX OUT HDMI OUT HDMI IN LINE IN DC 12V Power Supply IR Blaster IR Receiver DVD or Blu-ray UHDTV Player MP3 player RG6 Copper (75 ohm) coaxial cable Speaker UHDTV IR Receiver IR Blaster Power Supply RECEIVER FLASHER COAX IN...