Table of Contents Introduction Features Package Contents Specifications Operation Controls and Functions Application Example Thank you for purchasing this product Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this prod- uct.
Page 3
Registration Page Please Activate your warranty by registering our product through the link below - www.orei.com/register Technical Support Need Help? Our experienced Technical Support Team is here for you to answer your questions, give technical advice or help troubleshoot your project to get you installed on time and on budget.
Introduction This 18Gbps HDBaseT Extender can extend HDMI signal, bi-directional IR control signal, ARC signal and RS-232 control signal to a distance up to 70m / 230ft via a single CAT5e/6 cable. This product converts HDMI signal to standard HDBaseT sig- nal and transmits it through LAN cable.
Features HDMI2.0b and HDCP 2.2 compliant Support 18Gbps video bandwidth Support video resolution up to 4K2K@60Hz RGB/YCBCR 4:4:4 The transmission distance can be extended up to 70m / 230ft via a single CAT5e/6 cable Support bi-directional IR and RS-232 control signal pass-through Support ARC function, audio formats support Dolby 5.1, DTS 5.1, PCM2.0, etc.
Specifications Technical HDMI Compliance HDMI 2.0b HDCP Compliance HDCP 2.2 Video Bandwidth 18Gbps Video Resolution Up to 4K2K@60Hz RGB/YCBCR 4:4:4 IR Level 5Vp-p IR Frequency Wideband 20K-60KHz Transmission Distance 70m via a single CAT5e/6 cable Color Depth 8-bit, 10-bit, 12-bit (1080P) 8-bit (4K60) 8-bit, 10-bit, 12-bit (4K24/30) Color Space...
Page 8
Specifications Receiver Input: 1×HDBT IN [RJ45] 1×SPDIF IN Output: 1×HDMI OUT [TypeA, 19-pin female] Control: 1×RS-232 [3pin-3.81mm Phoenix connector] 1×SERVICE [Micro-USB jack] 1×IR IN [3.5mm Stereo Mini-jack] 1×IR OUT [3.5mm Stereo Mini-jack] Mechanical Housing Metal Enclosure Silkscreen Color Black Dimensions Transmitter / Receiver:140mm (W)×65mm (D)×18mm (H) Weight Transmitter: 235 g, Receiver: 239 g...
Operation Controls and Functions Transmitter Panel Name Function Description POWER LED The red LED is on when the Transmitter is powered on. Used for audio EDID setting (dial to COPY by default). EDID DIP COPY: Copy the EDID of the HDMI OUT port of Receiver. switch STD: Default 1080P 2CH SERVICE...
Page 10
Operation Controls and Functions Name Function Description ▪ Illuminating: Transmitter and Receiver are in good connection Link Signal status. Indicator ▪ Flashing: Transmitter and Receiver are in poor connection status. (Green) ▪ Dark: Transmitter and Receiver are not connected. Data Signal ▪...
Page 11
Operation Controls and Functions Receiver Panel Name Function Description Power LED The red LED is on when the Transmitter is powered on. ▪ When the HDMI IN port is connected to a signal source device with ARC function (e.g. Amplifier or Soundbar), the ARC function of the Extender is enable: Swicth to “HDMI ARC”...
Page 12
Operation Controls and Functions Name Function Description SERVICE Firmware update port. DC 24V/1A power input port. Note that the extender supports POC function, it means that either DC 24V Transmitter or Receiver is connected to 24V/1A power supply, the other doesn’t need power supply. RJ45 connector for connecting the HDBT OUT port of Transmitter HDBT IN with CAT6/6a cable.
Page 13
Operation Controls and Functions IR Receiver and Blaster pin’s definition is as below: Note: When the angle between the IR receiver and the remote control is ± 45 °, the transmission distance is 0-5 meters; When the angle between the IR receiver and the remote control is ± 90 °, the transmission distance is 0-8 meters.