Table of Contents
Advertisement
FINAL ASSEMBLY
FAST001
x2
ANCHORING
Location of 4
concrete anchors
Absco Industries
Assembly Instruction Manual
ABSCO POOL PUMP COVER
MODEL: PPCK-PTX
5' W x 5' D x 4' 10" H
6. Take a hasp, place it on the
edge of the door jamb and
centre it over the padbolt shaft.
Use two self tapping screws
FAST001 to secure.
Each anchor consists of one
nut, bolt, dynabolt and steel
angle.
Drill a hole into the wall sheet
to suit the bolt
Drill a hole into the concrete to
suit the dynabolt
5. Move the lid into position
Drill 3/16" holes through the
channel and sheet then secure
with countersunk screws and nuts
or pop rivets.
Internal view of lid padbolt and
closed door.
Model: PPCK-PTX
BOLT & NUT
STEEL
ANGLE
SLAB
DYNABOLT
27/4/23
1.0
WALL
SHEET
17
Advertisement
Table of Contents
