Front Panel Assembly - ABSCO SHEDS PPCK-PTX Manual

FRONT PANEL ASSEMBLY

94A
57A
FAST013
FAST013
94B
3
94B
Absco Industries Assembly Instruction Manual
ABSCO POOL PUMP COVER
MODEL: PPCK-PTX
5' W x 5' D x 4' 10" H
PPF
53B
79C
90C
- This completes the front panel -
1. Take the PPF sheet and
orientate with the 'narrow pan' to
the left
Place the 94A jamb with the
wider face on top of the sheet.
Make sure the ends are flush and
fasten with two 3/8" self tapping
screws in the two centre holes
only.
2. Attach the top and bottom
channels using the SNAP-TiTE
method.
The 0.8" side of the channel will
fit into the cut-outs in the 94A
jamb
Align the hole in the channels
with the end holes in the jamb
and fasten.
3. 94B jamb is fit into the ends
of the channels. Secure with a
longer 3/4" self tapping screw at
both ends.
4.
90C jamb is fit inisde the top of
the doorway, the cutouts in the
ends slot over the side jambs.
0.8" side of the 79C channel is
inserted into the bottom channel
and shorter side sits on top.
Fasten through aligned holes in
the channels:
3x 3/8" self tapping screws from
FAST001
outside
2x in the corners from inside.
x10
Model: PPCK-PTX 27/4/23 1.0 12