Wall Panel Assembly - ABSCO SHEDS PPCK-PTX Manual

WALL PANEL ASSEMBLY

Absco Industries Assembly Instruction Manual
ABSCO POOL PUMP COVER
MODEL: PPCK-PTX
5' W x 5' D x 4' 10" H
Side walls fit into the
cutouts in front &
rear wall channels.
D
Model: PPCK-PTX
1. Attach the front panel to the
right side panel.
Open the door to make the front
panel stand up on its own.
Fasten with four 3/8" self drilling
screws through the edge holes
2. Attach the left side panel use
the longer 3/4" self tapping
screws FAST013 and locate in
the prepunched holes in the side
wall's 64C channel
64C
3. Attach rear panel to side
panels by the sheet edge holes
using 3/8" self tapping screws.
4. Drill 3/16" holes in the top
channel and secure hinges with
countersunk screws or pop rivets.
Optional: Drill 1/8" holes and
secure 4x corner braces 88D with
a 3/8" screw at each end.
D
88D
27/4/23
FAST013
1.0 16