Meter Screen - Tascam Sonicview 16XP Reference Manual

p USB KEYBOARD TYPE buttons
Set the type of USB keyboard connected to the USB port on
the top of the unit.
The selected button will be highlighted.
Button Meaning
US US English keyboard
JPN (default) Japanese keyboard

METER screen

View various meters and make settings for them on this screen.
Tap Menu Screen > Mixer Setup > Meter to open this screen.
NOTE
Using the User Defined Control function, this screen can also
be opened with a USER KEYS, footswitch or the GPIO-IN. (See
"USER DEFINED CONTROLS screen" on page 47.)
button
1
Tap this button to return to the Menu Screen.
NOTE
If the button (6) on this screen appears highlighted (
), tapping this button will not return to the Menu Screen.
2 OVER Indicator
o This will appear highlighted red if the signal level at a
metering point of any module has overloaded. This will
continue to appear highlighted for the PEAK HOLD time
(4) set on this screen.
o Tap this area to clear the highlighting of this indicator and
the overload indicators of all level meters.
NOTE
They will appear to light red when the level reaches or
exceeds -0.00026 dBFS (16-bit full-scale value).
4 - Mixer configuration and settings
3 PEAK CLEAR button
Tap this button to clear the peak hold indicators for the
following level meters.
o Peak indicators that are held below overload levels
o Overload indicators for all level meters
NOTE
The OVER indicator (2) on this screen will not be cleared.
4 PEAK HOLD time display
o This shows the level meter peak hold time.
o Tap this area to open a window where the level meter
peak hold time can be set.
Options: OFF(no hold), 2 sec, 5 sec (default), 10 sec, 20 sec,
button
5
Tap this button to open the METER SETUP Screen. (See
"METER SETUP screen" on page 41.)
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
∞ sec (hold until cleared)
39