Tascam Sonicview 16XP Reference Manual page 99

Multitrack recording console
Table of Contents

Advertisement

5.
Set the AUTO ROUTING button to "ON".
6.
Following the procedures in "Mounting of devices
connected to the Dante network" on page 78, mount 4
SB-16D units one at a time from the top in the Mounted
Device list.
7.
Use Dante Controller on the computer connected to the
Dante network in step 3 to make the following connection
routing settings.
i Connect Dante I/O 1–16 of the IF-DA64 installed in
this unit to Dante I/O 1–16 of the SB-16D mounted 3rd
from the top
i Connect Dante I/O 17–32 of the IF-DA64 installed in
this unit to Dante I/O 1–16 of the SB-16D mounted 4th
from the top
As a result, the Dante I/O ports of this unit's built-in Dante,
the IF-DA64 (Dante card) installed in this unit's SLOT 1 and
the 4 SB-16D units are routed by Dante as follows.
4 - Mixer configuration and settings
Dante I/O ports of this
unit
Dante I/O 1–16 of this unit
Dante I/O 17–32 of this unit
SLOT 1 I/O 1–16 of this unit
SLOT 1 I/O 17–32 of this
unit
Sonicview
Dante I/O 1-16
Dante I/O 17-32
IF-DA64
SLOT 1 I/O 1-16
SLOT 1 I/O 17-32
8.
Acquire control privileges to enable operation of SB-16D
units mounted 3rd and 4th from the top and routed
through an IF-DA64 from the Home and MODULE screens
of this unit.
Tap the "Pre Amp Control OFF" buttons for the 3rd and 4th
devices to open the following confirmation message.
i If control privileges for those SB-16D units have not
been acquired by other devices:
The following message will be shown.
Tapping the ENABLE button will set the control
privileges and "Pre Amp Control" will be shown in the
control privilege display area.
TASCAM Sonicview 16XP/Sonicview 24XP V1.5.0
SB-16D Dante I/O ports
Dante I/O 1–16 of the SB-
16D mounted 1st in the list
Dante I/O 1–16 of the SB-
16D mounted 2nd in the list
Dante I/O 1–16 of the SB-
16D mounted 3rd in the list
Dante I/O 1–16 of the SB-
16D mounted 4th in the list
Automatic routing
when mounted
SB-16D #1-1
Automatic routing
when mounted
SB-16D #1-2
Routing using Dante
Controller
SB-16D #1-3
Routing using Dante
Controller
SB-16D #1-4
99

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sonicview 24xp

Table of Contents