4 - Screen overview
4 - 1
Home Screen
The Home Screen appears after the unit starts up.
Level meter
Operation status
File name/elapsed time/file count/timecode
Level meter
This shows the input sound level.
Operation status
Indicator
Operation status
Stopped
8
Paused
9
Playing
t
Searching forward
,
Searching backward
m
Recording
p
Skipping to the beginning of the next file
/
Skipping to the beginning of the current or previous file
.
File name/elapsed time/file count/timecode
Indicator
Operation status
File name*
Stopped
230123_0001.wav**
When changing tracks
When starting recording/playback
Elapsed time
When recording/playing back
[hh:mm:ss]
(Hours: minutes: seconds)
File count
This will appear for one second after the
[0001/0020]
following operations.
Current file/total number
o Skipping files when stopped
of files
o When stopping recording/playback
Timecode***
When timecode is enabled
[hh:mm:ss:ff ]
(Hours: minutes: seconds:
frames)
* If no files that can be played back are saved on the microSD card, "NO
FILE" will be shown. If a microSD card is not loaded, "NO CARD" will be
shown.
** When the Home Screen is open, the file name, including the file format
(extension), will scroll once and be shown.
*** To switch to timecode display, press and hold the 7'9 [ENTER]
button.
14
TASCAM DR-10L Pro V1.00
Connection status of timecode reception function
Power status display
Connection status of remote control function
Connection status of timecode reception function
Indicator
Blinking
Blinking (1-second cycle)
Lit
Power status display
Indicator
e
e
e
e
e
e
Indicator with 8 levels
e
d
Shown alternately
Connection status of remote control function
Indicator
Lit
Blinking
Operation status
Waiting for connection with timecode
device
Timecode being received
Timecode running independently
Operation status
Using batteries
e
This will blink when at the lowest level.
Using USB bus power
Operation status
Remotely connected with dedicated
control app
Waiting to connect with dedicated
control app