Table of Contents
Advertisement
TAILWHEEL INSTALLATION 3 POINT LIFT, SEMI MOUNT
1. Remove the Lift Arm Assemblies from the shipping position.
2. Place the Lift Arm Assembly to the axle assembly as shown in the illustration below and attach with two
U-bolts provided.
3. Install four 3/4" flatwashers, 3/4" lockwashers & 3/4" hex nuts - (2 per U-bolt) and tighten.
4. Remove the lug bolts from the hub and install the wheel assembly making sure the lug bolts are securely
tightened.
3308-2 Series
09/20
© 2020 Alamo Group Inc.
ASSEMBLY
AND PULL MODELS
TAILWHEEL ASSEMBLY
Lug Bolts
U-Bolts
Assembly Section 3-8
Lift Arm
Wheel Assembly
Assembly
3/4" Hex Nut
3/4" Lockwasher
3/4" Flatwasher
(4 Plc's.)
Advertisement
Chapters
Table of Contents
