Page 2
Scan QR-code The product label is positioned on the bottom of 1. Download and print the drilling guide from the Genexis Aura device and also other labels https://genexis.eu/product/aura/downloads are included in the giftbox. 2. Use the drilling guide to drill the holes and insert the plugs.
Page 3
Using the wall-mount bracket 3. Or alternatively, press the device in the wall- Setting up the Aura Connecting your telephone Place device in the wall-mount bracket. mount bracket until it is locked and holds the 1. Connect a network cable between your You can connect a regular plain telephone to 1.
Port overview Connecting to the wireless network Using the web interface You can connect your personal device to the When connected to your network, you can Reset button (recessed) Aura E650 by scanning the QR-code access the Aura E650 web interface to change Reboot –...
Page 5
LED & button overview Support Is the Status LED solid red? Is the Status LED blinking yellow? Contact your service provider. The Aura E650 is being upgraded with new software. Please wait until the Status LED turns Is the Status LED solid yellow? solid green again.
EU Declaration of Conformity Hereby, Genexis Netherlands B.V. declares that the Aura E650 product is in compliance with Directive 2014/53/EU, Directive 2009/125/EC, Directive 2011/65/EU and Delegated Directive 2015/863. The full text of the EU declaration of conformity is available at the following internet address: https://genexis.eu/product/aura/red/aura-e650...
Need help?
Do you have a question about the Aura Series and is the answer not in the manual?
Questions and answers