Table of Contents
Advertisement
Attended Transfer before Answer
To perform an attended transfer before the other party answers the phone, select the Options soft
key and then press Transfer. Or you can press the
handset that you would like to transfer the call to, and then press the
Once you receive the ring back tone and before the other party answers the phone press Transfer
or the
key.
Attended Transfer after answer
To perform an attended transfer before the other party answers the phone, select the Options soft
key and then press Transfer. Or you can press the
Enter the number or select the handset that you would like to transfer the call to, and then press
the
key to dial out. After the other party answers the phone press Transfer or the
Conference Call
In order to initiate a conference call, follow the steps below:
Place a call to User A
Press the Options soft key and then select Conference
Enter the number of the User B that you would like to add to the conference, and then
press the
When User B answers the call press the Conf. soft key to join all the parties into the
conference bridge.
To add another User into the conference bridge follow the steps above. Up to 4
parties (including yourself) can be in the conference call.
To end the conference call, press the
Call Forwarding
There are 3 types of call forwarding that can be managed by the device:
Call Forward Always:
Incoming calls are immediately forwarded to the specified number
Horizon
|
Yealink W52P Full User Guide
© Gamma 2016. All rights reserved. Confidential.
or the "OK" soft key to dial out.
or
or
key directly. Enter the number or select the
key to dial out.
key directly.
key.
key.
Page
17
of
27
Advertisement
Table of Contents
