Initiating A Conference Call; Using The Speed Dial Key; Listening To Voice Mails - Yealink SIP-T54W Quick Start Manual

Yealink SIP-T54W
Quick Start Guide

Initiating A Conference Call

1. Press Conference during an active call to place the call on hold
2. Enter the number of the second party, then press Send
3. Press Conference again when the second party answers the call to connect all parties to the call
4. Press End Call to disconnect all parties.
NOTE: You can split the conference call back into two individual calls by pressing the Split softkey.
Configuring and Using Speed Dial
T C
O ONFIGURE
1. Navigate to Menu, select Features and then Dsskey
2. Select the desired DSS key and then press Enter
3. Select SpeedDial from the Type field, select the desired line from the Account ID field, enter
a label in the Label field and finally enter the number in the Value field
4. Press Save
U S
SING THE PEED
1. Press the speed dial key to dial out the present number

Listening to Voice Mails

The message waiting indicator (looks like a letter) will appear on the idel screen and indicates that one or more
voicemail messages are waiting at the message center. The power indicator LED, at the top of the screen, slowly
flashes red.
1. Press or Connect
2. Follow the voice prompts to listen to your voicemail messages
©2020 Peachtree Communications, Inc.. All rights reserved. PeachComm and the PeachComm family of marks
and logos are trademarks of Peachtree Communications, Inc. (Revised 10.08.20)
A S D K
PEED IAL EY
D K
IAL EY
6