Quick Start; Inspect Product Accessories; Front Panel - East Tester ET3260 User Manual

Users manual

1. Quick Start

1.1 Inspect Product Accessories

Confirm that multimeter is attached with the following subjects, among which the optional
accessories can be attached to products only after purchasing. If any subject is missed, please
contact the closest sale office.
Standard equipped accessories:
One set of hard-spot testing line and a

2mm probe
One piece of double-end three-core

power line
One pair of alligator clips

Two pieces of backup power fuses


1.2 Front Panel

This 6 1/2 digit multimeter provides a 480*320 TFT display, and the equipped display can
indicate current working status, F1-F5 software define area, measured value, etc.
No.
1 HI and LO sense input terminals. Use 4-wire resistance voltage to measure the input, or
refer to ratio measurement for voltage input.
2 HI and LO main input terminal, all functions exclusive of current)
3 480×320 TFT LCD
4 Function keys of digit multimeter. Select functions of digit multimeter, such as DC voltage,
AC voltage, DC current, AC current, resistance, continuity, diode test, frequency, period,
capacitance, ratio and sensor.
5 Direction and enter key can set measurement range and measurement rate in normal
measurement interface and can be used in menu selection and numeric value setting in
menu.
6 Soft power switch.
7 USB HOST interface is used for procedure updating and data storage.
ET3260 and ET3260A
Introduction
6 1/2 Digit Multimeter
ET32 User manual

Optional equipped accessories:
GPIB cable

Cabinet-installing suite

PT100 temperature probe

RS232 serial port line

USB data line

8