Ac Voltage Measurement - East Tester ET3260 User Manual

Users manual
1) Press to select DC voltage ratio measurement function.
Description: Major display represents the voltage ratio value between main input terminal and
sense terminal, the lower part (IN) represents voltage value measured at main input terminal, and
(REF) represents reference voltage value measured at sense terminal.
2) Connect test lines as indicated in the chapter of 1.4 Measurement wiring.
3) Press and
configuration for details

2.1.3 AC voltage measurement

Basic information
Measurement range: 100mV, 1V, 10V, 100V and 750V.

AC technology: true virtual value measurement and AC coupling method.

Maximum resolution: 100nV.

Operation description
1) Press to select AC voltage measurement function.
Description: Major displayed value refers to measurement voltage value, and auxiliary displayed
value refers to frequency measurement value of the current input signal.
2) Connect test lines as indicated in the chapter of 1.4 Measurement wiring.
3) Select measurement range as required, and may select automatic measurement, or press the
softkeys of Measurement range+ (
ET3260 and ET3260A
to select different integral times, and refer to the chapter of Measurement
) and Measurement range- (
6 1/2 Digit Multimeter
17
) to select fixed