Table of Contents
Advertisement
Brief Introduction to ET 3260 and ET 3260A Digit Multimeter
ET3260 or ET3260A multimeter provides 6 1/2digits, high-performance AC and DC
measurements.
The multimeter is equipped with a 3.5-inch color display with high resolution and built-in
intelligent operation system, and is able to provide more information and functions, simpler
operation, wider testing range and more flexible and convenient system building. It is a new digit
multimeter that leads the developing tendency above.
They are mainly characterized by:
6 1/2 resolution (ET3260/ET3260A)
The digital multimeter is equipped with a 3.5-inch color display screen (resolution ratio is
320*480), which is powerful enough to provide greater coverage of content, flexible display
of a variety of graphical interface, and good display effects. The users can also customize
the display interface depending on their needs, and choose from various display functions
such as graphics, figures, maths and other functions simultaneously on the screen.
Bi-parameter display can display two parameters in one input signal (such as display AC
voltage value and AC frequency value during AC voltage measurement).
Conduct remote operation through interfaces of IEEE 488 (ET3260), RS-232, LAN and
USB Device.
With functions of trigger input and output of measuring completion.
The front-panel menu is with USB port for data storage, procedure updating and
configuration.
Customers can update host software by themselves.
Two-wire and four-wire measurement for resistance, 10Ω and 1GΩ measurement range for
extension.
Measurement of period and frequency, and frequency can reach to 300 KHz.
Capacitance measurement.
For temperature measurement, users can set sensor measurement by themselves.
Maximum current measurement capacity reaches up to 12A.
Many math functions: statistics (maximum value, minimum value and average value), zero
elimination, dB, dBm and limit.
Graphic display: tendency chart, histogram, history curve, listing and other display
methods.
Support SCPI programming language and many command sets (Agilent 34401A and Fluke
45).
With internal and external calibration functions.
Basic difference:
ET3260
With GPIB interface
With
rear panel
terminal
ET3260A
Without GPIB interface
signal
input
Without rear panel signal input
terminal
5
Advertisement
Table of Contents
