Data Record; Relevant System Operations; System Setting - East Tester ET3260 User Manual

Users manual ET3260 and ET3260A 6 1/2 Digit Multimeter
When opening, VM Comp (Voltmeter Complete Terminal) on rear panel will provide a negative
pulse every time each measurement is completed. Voltmeter completer signal and external trigger
signal can realize standard hardware exchange (Hand Shake) sequence between measurement
device and switch device.

3.4 Data Record

Data record function of ET3260 and 3260A provides a front-panel user interface to make it
possible for you to check history data without connecting to a computer.
When switching functions or power failing, data record will be cleared out, and if necessary,
please save the record into USB drive.
When the USB interface on front panel is connected to USB drive, it can save history data to the
measRecords folder under USB drive's root directory, with the measurement data being csv file
which is named by current function name plus serial number, such as DCV-1.csv.
Press (History) to enter history data interface, and scan data through direction keys,
which is as shown in the following:
Press the softkey of Update ( ) to refresh historic data.
Press the softkey of Store in U disk ( ) to save the data into USB drive as csv file, when it
is necessary to set file name.
The file is named by current function name plus serial number, wherein function name is
automatically set by system and you just need to set serial number through direction keys, and
then press .

3.5 Relevant System Operations

3.5.1 System setting

35