ICON PRO-FORM ENDURANCE 1120 E User Manual page 23

Table of Contents

Advertisement

HOW TO CHANGE CONSOLE SETTINGS
1. Select the settings mode.
To select the settings mode, press the Settings
button. The settings information will appear in the
display.
2. Navigate the settings mode.
While the settings mode is selected, the matrix of
the display will display several optional screens.
Press the increase button next to the Enter button
repeatedly to select the desired optional screen.
The lower section of the display will show instruc-
tions for the selected screen. Make sure to follow
the instructions shown in the lower part of the
display.
3. Change settings as desired.
Units—The currently selected unit of measurement
will appear in the display. To change the unit of
measurement, press the Enter button repeatedly.
To view distance in miles, select ENGLISH. To view
distance in kilometers, select METRIC.
Incline System Calibration—If the incline sys-
tem is not functioning properly, it may need to be
calibrated. To calibrate the incline system, press
the Ramp increase or decrease button. The ramp
will move upward and downward as it calibrates.
When the ramp stops moving, the incline system is
calibrated.
Contrast Level—The currently selected con-
trast level will appear in the display. To adjust the
contrast level, press the Resistance increase and
decrease buttons.
Usage Information—The display will show the
total number of hours that the elliptical has been
used and the total distance (in miles or kilometers)
that has been pedaled on the elliptical.
4. Exit the settings mode.
Press the Settings button to exit the settings mode.
23

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pfel51217c.0

Table of Contents