Sharp MX-M550 Operation Manual page 57

■ Misfeed in paper tray 3
1 Remove the duplex unit.
2 Remove the misfed paper.
Roller rotating knob A
3 Open the lower cover on the left side of the
machine.
4 Remove the misfed paper.
NOTE
A misfeed may occur inside the compartment, so
please check the entire compartment carefully.
■ Misfeed in the tray 4
To remove a misfeed in tray 4, follow the same steps as in "Misfeed in paper tray 3".
Grasp the finger hold
and gently open the unit.
Turn roller rotating knob
A in the direction of the
arrow to remove the
misfed paper.
Grasp the finger hold
and gently open the unit.
Be careful not to tear the
misfed paper during
removal.
5 Close the lower cover on the left side of
the machine.
If misfed paper is not found in step 3, pull out
6
paper tray 3 and remove the misfed paper.
7 Gently close paper tray 3.
8 Gently close the duplex unit.
MISFEED REMOVAL
Pull the tray all the way
out until it stops.
Check the paper
transfer unit inside the
tray.
Be careful not to tear the
misfed paper during
removal.
Push the tray all the way
back in.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.
2-27
2