Part Names And Functions; Exterior - Sharp MX-M550 Operation Manual

PART NAMES AND FUNCTIONS

Exterior

(AR-F15)
Saddle stitch finisher (AR-F16)
1
Finisher (AR-F15) (See page 3-2)
*1
Punch module (AR-PN4B)
2
Inserter (AR-CF2) (See page 3-14)
3 *1
4 Automatic document feeder (See page 4-2)
This automatically feeds and scans multiple sheet
originals. Both sides of two-sided originals can be
scanned at once.
Front cover
5
Open to replace toner cartridge.
Operation panel
6
Center tray (See page 4-9)
7
Finished sheets are deposited here
Bypass tray
8
Special papers (including transparency film) and
copy paper can be fed from the bypass tray.
*1 , , , and
1 2 3 10 11
devices in the manual.
1-10
/
*1
(See page 3-2)
*1
are peripheral devices. For information on these devices, see the explanations of the
Power switch (See page 1-17)
9
Turns the power on and off.
If the power does not come on when the power
switch is turned on, check the main power switch to
see if it is turned on.
Tray 5 (Large capacity tray (AR-LC6))
10
(See page 2-7)
Tray 5 (Large capacity tray (AR-LC7))
11
(See page 2-8)
Tray 1-Tray 2
12
The trays hold paper. Approximately 800 sheets of
standard 8-1/2" x 11" or A4 size paper (20 lbs. (80
g/m
)) can be loaded in tray 1, and approximately
2
1200 sheets of standard 8-1/2" x 11" or A4 size
paper (20 lbs. (80 g/m
2
Tray 3
13
Tray 3 holds paper. Approximately 500 sheets of
standard (20 lbs. (80 g/m
in this tray. Tabbed paper and transparencies can
also be loaded.
Tray 4
14
Tray 4 holds paper. Approximately 500 sheets of
standard (20 lbs. (80 g/m
in this tray.
*1
*1
)) can be loaded in tray 2.
)) paper can be loaded
2
)) paper can be loaded
2