Normal Copying; Making Copies With The Automatic Document Feeding Function; Function - Sharp MX-M550 Operation Manual

NORMAL COPYING

This section describes the normal copying procedure.
Making copies with the automatic document feeding

function

■ 1-sided copies of 1-sided originals
Original
1 Place the originals in the document feeder
tray. (pages 4-3 to 4-6)
Ensure that the 1-sided to 1-sided copy
2
mode is selected.
ORIGINAL
8 x11 1 /
2
1 2 3
1 2 3
8 x11 1 /
2
1. 2.
5.
8 x11 1 /
2
8 x11 1 / 8 x11 1 /
2 2
3. B4
8 x14 1 /
2
4.
11x17
already selected, steps 3 to 5 are not needed.
3 Touch the [2-SIDED COPY] key.
SPECIAL MODES
2-SIDED COPY
OUTPUT
4 Touch the [1-sided to 1-sided copy] key.
Copy
The one-sided to one-
sided mode is selected
when no icon for a two-
sided mode appears in
the dashed area on the
display. If the 1-sided to
1-sided copy mode is
Touch the [1-sided to 1-
sided copy] key.
5 Touch the [OK] key.
0
OK
Ensure that paper of the same size as the
6
originals is automatically selected*.
AUTO
EXPOSURE
AUTO 8 x11
1 / 2
PAPER SELECT
100%
O
Even if the message above appears, copying can
be performed onto the currently selected paper.
*
The following requirements must be satisfied.
Originals of a standard size (11" x 17", 8-1/2" x
14", 8-1/2" x 11", 8-1/2" x 11"R or 5-1/2" x 8-1/2R"
(A3, B4, A4, A4R, B5, B5R or A5)) are set and the
auto paper select function is enabled.
READY TO SCAN FOR COPY.
1. 8 x11 1 / 2. 8 x11 1 / 8 x11 1 /
2 2
2
PLAIN PLAIN PLAIN
3. 8 x14 1 / PLAIN 5. 8 x11 1 /
2 2
4. 11x17 PLAIN
PLAIN
desired paper size selection key.
The selected key will be highlighted and the paper
selection screen will close. To close the paper
selection screen without making a selection, touch
the [PAPER SELECT] key.
The selected tray will be
highlighted or the
message "LOAD xxxxxx
PAPER." will appear. If
the message appears,
load paper in a paper
tray with paper of the
required size.
If originals of a size other
than the sizes above are
to be copied, manually
select the desired paper
size by touching the
[PAPER SELECT] key
and then touching the
4-7
4