Sharp MX-M550 Operation Manual page 122

SPECIAL MODES
■ Procedure for adding inserts
You can have different paper automatically inserted as an insert at a specified pages. Two types of insert paper
can be used. These are specified with the [INSERTION TYPE A SETTING] key and [INSERTION TYPE B
SETTING] in the touch panel. Tabbed paper can be used as an insert.
●Examples of insertion methods for insert paper are given on page 5-22.
To display the special modes screen...
See "General procedure for using special
functions" on page 5-2.
Touch the [COVERS/INSERTS] key in the
1
special modes screen (2nd screen).
SPECIAL MODES
TRANSPARENCY
COVERS/INSERTS
INSERTS
BOOK COPY TAB COPY
Touch the [PAPER TRAY SETTINGS] key.
2
COVERS/INSERTS
INSERTION
FRONT COVER
TYPE A SETTING
INSERTION
BACK COVER
TYPE B SETTING
3 Select the tray used for insertion type A.
PAPER TRAY SETTINGS
FRONT COVER
BACK COVER
BYPASS BYPASS
TRAY TRAY
8 x11 1 / 8 x11 1 /
2 2
PLAIN PLAIN
The tray name (tray position) selected for
1
insertion type A and the paper size and type are
shown in (X). If the tray in which you loaded
paper for insertion type A is shown, touch the
[OK] key. You will return to the screen of step 2.
If the correct tray for insertion type A does not
2
appear in (X), touch the (Y) key. The tray
selection screen will appear. Select the tray in
which you loaded paper for insertion type A. You
will return to the screen of step 2.
4 Touch the [INSERTION TYPE A SETTING]
key in the screen of step 2
5-14
CANCEL OK
PAPER TRAY
SETTINGS
INSERTION
SETTINGS
PAGE LAYOUT
OK
INSERTION INSERTION
TYPE A TYPE B
BYPASS BYPASS
TRAY TRAY
8 x11 1 / 8 x11 1 /
2 2
PLAIN PLAIN
(X) (Y)
5 Set the insertion conditions for insertion
type A .
INSERTION TYPE A SETTING
1-SIDED
PRINT ON INSERT SHEETS
YES NO
TAB COPY
(Y)
(X)
1 Select whether or not insertion type A paper is
to be copied on with the (X) keys ([YES] or
[NO]).
Select whether one-sided copying or two-sided
2
copying is to be performed on insertion type A
with the (Y) keys. This selection is only possible
when the [YES] key of (X) has been selected.
(The one-sided/two-sided selection made here
only applies to insertion type A paper. When
insertion type B is selected, the selection only
applies to insertion type B paper.)
3 The (Z) key shows the tray selected for insertion
type A in step 3 and the paper size and type.
If a paper tray with tabbed paper is selected in
4
the screen of step 3, you can touch the [TAB
COPY] key. This allows you to select the tab
width. Two-sided copying is not possible on
tabbed paper.
6 Touch the [OK] key in the screen of step 5.
You will return to the screen of step 2.
When you return to the screen of step 2, the
[INSERTION TYPE A SETTING] key will be
highlighted.
If you wish to insert a different paper with
7
the [INSERTION TYPE B SETTING] key,
repeat steps 2 through 6. Use the
[INSERTION TYPE B SETTING] key instead
of the [INSERTION TYPE A SETTING] key,
and the [INSERTION TYPE B] key instead
of the [INSERTION TYPE A] key.
CANCEL
TS
INSERTION
TYPE A SETTING
INSERTION
SETTINGS
INSERTION
TYPE B SETTING
CANCEL OK
2-SIDED
PAPER TRAY
BYPASS
TRAY
8 x11
1 /
2
PLAIN
(Z)
OK
OK
PAPER TRAY
SETTINGS
PAGE LAYOUT