Special Papers - Sharp MX-M550 Operation Manual

SPECIAL PAPERS

Special papers including transparency film, postcards and tabbed paper must be fed through the bypass tray.
1 Place the original in the document feeder
tray or on the document glass. (pages 4-3
to 4-6)
2 Load the special paper in the bypass tray.
Touch the [PAPER SELECT] key.
3
AUTO
EXPOSURE
4
AUTO 8 x11 1 / 2
PAPER SELECT
100%
COPY
4 Set the type and size of paper loaded in the
bypass tray.
AUTO
ORIGINAL
8 x11 1 /
2
AUTO
N HEAVY PAPER
EXPOSURE
5. 8 x11
APER 1 /
2
PAPER SELECT
PLAIN
N
100%
COPY RATIO
(X) (Y)
To change the displayed paper type, touch the
3
(X) key before touching the (Y) key. When
loading paper, if you changed the paper size
from an inch size to an AB size (or from an AB
size to an inch size), or if you changed the paper
type, be sure to change the paper type and size
settings as explained in steps 5 to 7 on page 2-
14, and steps 8 to 10 on page 2-15.
4-20
See page 2-12 for the
specifications of paper
that can be used in the
bypass tray.
For the paper loading
instructions, see
"Loading paper in the
bypass tray" (page 2-
10).
0
The (X) key shows the
1
currently selected
paper type.
The (Y) key shows the
2
size of paper loaded
in the bypass tray.
5 Select the bypass tray.
AUTO
ORIGINAL
8 x11
1 /
2
AUTO
N HEAVY PAPER
EXPOSURE
PAPER 5. 8 x11 1 /
2
PAPER SELECT
N PLAIN
100%
COPY RATIO
6 Select any desired copy settings such as
the exposure or number of copies, and
then press the [START] key.
0
When copying from the
document glass in the
sort mode using the
[START] key, touch the
[READ-END] key after
all originals have been
scanned (step 7 on page
4-12).