Image Projection; Shifting The Lens - Sharp XV-Z30000 Operation Manual

Image Projection

Shifting the Lens

In addition to the zoom function and adjustment of projection angle using the
adjustment feet, you can adjust the position of the projection using the lens shift
function. This is a useful function in cases such as when the screen cannot be moved.
When moving upward or downward
Adjustable
range
Adjustable range
• The adjustable range is shown below.
Horizontal range: ±20%
Vertical range: ±50%
The adjustable range has limitations even
within the range shown above.
• The image can be adjusted as shown on the
diagram.
• Allow a margin of error in the value.
1 1
Press H&V SHIFT on the remote
control.
• Pressing ENTER on the projector or on
the remote control displays the test
pattern. Checking the test pattern is useful
for more accurate adjustment.
ROn-screen display
END
LENS SHIFT
TESTPATTERN
2 2 Press P, R, O or Q on the
projector or the remote control
to adjust the image position.
Note
• When RETURN is pressed, the lens shift
reset screen is displayed. Lens shift can be
reset to factory default with this screen.
LENS SHIFT
LENS CENTER
When moving in the left and right direction
Position of the image when the image is
centered, both vertically and horizontally,
in lens shift
0.5V
1V
0.5V
0.2H
V : Height of the image
H : Width of the image
ENTER button
Adjustment buttons
(P/R/O/Q)
RETURN button
H&V SHIFT button
1H 0.2H
29