Receiving a 3D Image Signal That
Cannot Be Detected Automatically
1
1
Press 3D MENU.
•
The 3D MENU screen is displayed.
2
2
Press P/R to select "3D".
3
3
Press O/Q to select "On" or "Off".
•
To view in 3D mode: Select "On", and then
go to step 4.
•
Refer to "Setting the 3D Format Menu" on
page
71
for supported 3D signals and
formats.
•
If you select "Off", the video source will be
displayed with no conversion.
4
4
Press P/R to select "3D Format",
and then press ENTER.
5
5
Press P/R to select a supported
format from the list, and then
press ENTER.
Auto
Side By Side
Top And Bottom
•
If you select the same system as that of
the input signal, 3D images are displayed.
6
6
Turn on the 3D Glasses and place
them over your eyes.
•
Press the power button for at least 2
seconds.
•
The LED light blinks 3 times.
7
7
You can now view 3D images.
Ending 3D Image Viewing
1
1
Press 3D ON/OFF during the 3D
mode.
2
2
Take off the 3D Glasses and turn
off the power.
•
Press the power button for at least 2
seconds.
•
The LED light lights for 2 seconds.
Note
•
If the input signal switches to 2D, 2D images
are displayed automatically.
•
3D mode is canceled automatically in the
following cases:
- When the signal is no longer received
- When the signal type changes
- When input selection is changed
- When the power is turned off
69