Hold Function - Sharp MDMT877 Operation Manual

Hold Function

The present operation condition can be kept even if other buttons are accidentally pressed in a place such
as a crowded train.
Main unit
Press the • / –HOLD button for 2 seconds
or more.
Hold
If the battery is inserted or the AC adaptor is connected,
you can set this function even when the power is turned
off.
To cancel the hold mode
Press and hold down the •
onds or more while the unit is in the hold mode.
"HOLD OFF" will be shown.
16
Remote control unit
Move the HOLD switch to the safety position
(direction indicated by the arrow).
Release
To cancel the hold mode
Move the HOLD switch away from the safety posi-
tion (the opposite direction of the arrow).
/ –HOLD button for 2 sec-
If the hold function is active while the power is
turned off, the power cannot be turned on by mis-
take and the battery will not be drained.
Orange mark
Hold