Specifications - Sharp MDMT877 Operation Manual

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification
changes for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some devia-
tions from these values in individual units.
Power source DC 1.2V:
DC 5V:
DC 1.5V:
DC 1.5V:
Power consumption 7 W (AC adaptor)
Output power RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time Approx. 3.5 hours
Input sensitivity MIC H: reference input level
MIC L: reference input level
LINE:
Output level Earphones: maximum output level 5 mW + 5 mW
LINE:
Dimensions Width: 2-27/32" (71.9 mm) Height: 11/16" (16.8 mm)
Weight 0.29 lbs. (131 g) with rechargeable battery
Input jack Line/optical digital, microphone (powered by the main unit)
Output jack Earphones (impedance: 32 ohms)/remote control unit
Type Portable MiniDisc recorder
Signal readout Non-contact, 3-beam semiconductor laser pickup
Audio channels Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response 20 – 20,000 Hz ( 3 dB)
58
Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
AC adaptor (AC 120V, 60 Hz)
Commercially available, "AA" size (LR6), alkaline battery x 1
Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC nega-
tive ground electrical system) (Used with separately available plug adaptor
(AD-M66PA))
0.25 mV
2.5 mV
reference input level 100 mV
specified output 250 mV (-12 dB)
input impedance 10 k ohms
input impedance 10 k ohms
input impedance 20 k ohms
load impedance 32 ohms
load impedance 10 k ohms
Depth: 3-1/8" (78.7 mm)