Sharp MDMT877 Operation Manual page 35

Advanced Recording (continued)
About track numbers
1. Track numbers are created automatically during re-
cording via the analog connection when a silence of
1 second or more is detected (Auto marker function).
A series of tracks can be recorded as one by dis-
abling the auto marker function, see page 34.
About 1
second
Silence
First
track
2. When recording from a CD or a MiniDisc using the
digital connection, track numbers will be created at
the same points as on the CD or MiniDisc (Synchro
marker function).
First track Second track Third track
Playback
Track A Track B
side
First track Second track Third track
Recording
Track A Track B
side
Track numbers may not be created in proper places,
depending on the source to be recorded from, such as
signals with noise.
The track numbers on the playback side may not match
the track numbers recorded on the MiniDisc.
When recording, if a programmed playback is performed
by the source or playback is performed by selecting
tracks manually, the MiniDisc track numbers may not be
the same as on the source.
Track numbers may not be created properly, depending
on the connected stereo system.
Second
track
Track C
Track C
35