Sharp MDMT877 Operation Manual page 45

Titling a MiniDisc : continued
To add characters
1
Put the unit in the character input mode.
(Perform steps 1 - 2 on page 43.)
2
Press the VOL + or VOL – button to move the
cursor to the right of the character, where you
want to add a new character.
3
Select the character to add.
(Perform steps 3 - 4 on page 43.)
4
Press the ENTER button.
5
Press the EDIT button.
6
"TOC" will be displayed. To write the up-
dated contents to the MiniDisc, press the
• / :OFF button.
You cannot remove the MiniDisc while TOC is dis-
played. TOC will not disappear until the recorded
contents have been updated.
45