Titling A Minidisc - Sharp MDMT877 Operation Manual

Titling a MiniDisc

Creating disc and track names
Load a MiniDisc to be named. A playback-only or record-
ing-prevented MiniDisc cannot be edited.
1
Disc name Track name
While in the pause While in the pause
mode with "DISC" dis- mode, press the EDIT
played, press the EDIT button repeatedly to
button repeatedly to select "TRACK NAME".
select "DISC NAME".
If "DISC" is not displayed, you cannot select "DISC
NAME."
"DISC" is displayed when the •
once.
2
Press the ENTER button.
Cursor
The unit will enter the character input mode.
To cancel the operation, press the •
button.
3
Press the DISP button repeatedly to select
the type of characters.
(Capital letters) (Lower-case letters) (Numbers and symbols)
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
4
Press the 5
select the letter.
5
/:OFF is pressed Press the ENTER button to enter it.
Position where the next letter will be entered
6
To enter more letters, repeat steps 3 - 5.
/ :OFF
5 or 4 4 button repeatedly to
5 5 5 4 4 4
Continued to the next page
43