User Account And Camera Setup On Android™ Devices; Download Hubble For Motorola Monitors App; Run Hubble For Motorola Monitors App On Android™ Device; Add The Camera To Your Account - Motorola Smart Nursery 7 User Manual

5.3 User Account and Camera Setup on Android™ Devices
What you need
• Smart Nursery Camera
• Power adapter for the Smart Nursery Camera
• Device with Android
5.3.1

Download Hubble for Motorola Monitors App

• Go to Google Play™ Store to search for "Hubble for Motorola Monitors".
• Download "Hubble for Motorola Monitors" App from Google Play™ Store
and install it on your Android™ device
5.3.2 Run Hubble for Motorola Monitors App on Android™ device
• Ensure that your Android™ device is connected to your Wi-Fi
• Run "Hubble for Motorola Monitors" App, enter your account information,
read through the Terms of Service, then select "I agree to the Terms of Use"
before you tap
NOTE
If you already have a Hubble App account, please select Already have an
Account? to login.
5.3.3

Add the Camera to your account

1. Tap on the top right corner of the screen to add camera.
2. Tap Camera.
3. Plug in and switch on the Camera. Wait for a couple of minutes for it to
warm up and the Camera LED starts to blink.
4. Tap Continue.
5. Press and hold the
seconds. You will hear a beep tone, followed by a voice prompt indicating
that the Camera is ready for pairing.
Continue
6. Tap
The App will search for the Camera.
7. Tap to select the Camera (CameraHD-xxxxxxxxx).
The App will connect with the Camera.
8. Select your Wi-Fi
9. Enter your router password and tap
Accessing the Smart Nursery Camera via your Mobile Devices
TM system version 4.2 and above
Create
.
PAIR
button on the underside of the Camera for 3
.
®
Network and tap Connect.
Connect
.
®
router.
21