Cleaning Function; Before Running The Cleaning Function; Setting The Self-Cleaning Function - Siemens iQ700 HB875G8B1A Instruction Manual

Table of Contents

Advertisement

.Cleaning function

U se "Self-cleaning" mode to clean the cooking
C l e a n i n g f u n c t i o n
compartment.
You can choose from three cleaning settings.
Setting
Cleaning level
1
Light
2
Medium
3
Intensive
The dirtier the cooking compartment and the longer the
dirt has been there, the higher the cleaning setting
should be. A cleaning cycle requires only approx. 2.5 –
4.7 kilowatt hours.
For your safety, the cooking compartment door
Note:
locks automatically. It cannot be opened again until the
symbol for the locking mechanism goes out in the
H
status bar. The interior lighting remains off during
cleaning.
:
Warning
Risk of burns!
The cooking compartment becomes extremely hot
during the cleaning function. Never open the
appliance door. Allow the appliance to cool down.
Keep children away from the appliance.
The appliance becomes very hot on the outside
;
Risk of burns!
during the cleaning function. Never touch the
appliance door. Allow the appliance to cool down.
Keep children at a safe distance.
:
Warning
Risk of harm to health!
The cleaning function heats up the cooking
compartment to a very high temperature so that food
remnants left over from roasting, grilling and baking will
burn off.This process releases vapours, which can
irritate the mucous membranes. While the cleaning
function is running, keep the kitchen well ventilated. Do
not remain in the room for long periods. Keep children
and pets away. Follow the instructions even when using
the Delayed start function with a delayed end time.

Before running the cleaning function

While cleaning is in progress, you can clean an
accessory at the same time, e.g. the universal pan or
the baking tray. Before starting the cleaning function,
remove the worst of the food remnants manually. Slide
the accessory in at level 2.
Clean the appliance door and along the edges of the
cooking compartment in the area around the seal. Do
not scrub or remove the seal.
Clean the inner door panel using hot soapy water and a
dish cloth. Dry with a soft cloth. If the cooking
compartment is heavily soiled, use oven cleaner.
You can clean the enamelled accessory supplied
Note:
in the cooking compartment when the cleaning function
is cleaning the cooking compartment. You cannot clean
any of the wire racks when using the cleaning function.
Duration
Approx. 1 hour, 15 minutes
Approx. 1 hour, 30 minutes
Approx. 2 hours
The wire racks are not suitable for the cleaning function
and will become discoloured. Further accessories that
can be cleaned using the cleaning function are listed in
the table for special accessories. ~ "Accessories"
on page 10
:
Warning
Risk of fire!
Loose food residues, grease and meat juices may
catch fire during the cleaning function. Before
starting the cleaning function, remove coarse dirt
from the cooking compartment and from the
accessories.
The appliance will become very hot on the outside
Risk of fire!
during the cleaning function. Never hang
combustible objects, e.g. tea towels, on the door
handle. Do not place anything against the front of
the appliance. Keep children away from the
appliance.
If the door seal is damaged, a large amount of heat
Risk of fire!
will be generated around the door. Do not scrub or
remove the seal. Never operate the appliance if the
seal is damaged or missing.
:
Warning – Risk of serious damage to health!
The appliance will become very hot during the cleaning
function. The non-stick coating on baking trays and tins
is destroyed and noxious gases are released. Never
clean non-stick baking trays and baking tins using the
cleaning function. Only clean enamelled accessories
using the cleaning function.

Setting the self-cleaning function

Press the menu button.
1.
The operating modes menu opens.
Use the rotary selector to select "Self cleaning".
2.
Touch the arrow
.
¿
3.
Cleaning setting 3 is suggested. You can start the
cleaning process immediately using the "Start/stop"
button or
select a different cleaning setting using the rotary
4.
selector.
Press the "Start/stop" button.
5.
Instructions for the cleaning operation appear on the
display.
Press the "Start/stop" button to start the cleaning
6.
operation.
Ventilate the kitchen when the cleaning function is
running.
The cooking compartment door locks shortly after
operation starts. The
H
mechanism appears on the right-hand side of the status
bar next to the elapsing duration.
The cooking compartment door cannot be opened until
the
symbol goes out in the status bar.
H
Once the cleaning has finished
An audible signal sounds. The oven stops heating. Use
the
button to switch off the audible signal. "Appliance
0
cooling down" appears on the display.
Cleaning function
symbol for the locking
en
19

Advertisement

Table of Contents
loading

Table of Contents