Dishes; Information On The Setting; Selecting A Dish; Applying Settings For Dishes - Siemens iQ700 HB875G8B1A Instruction Manual

PDishes
Y ou can use the "Dishes" operating mode to prepare a
D i s h e s
wide variety of food. The appliance selects most
settings for you.
To achieve good results, the cooking compartment
must not be too hot for the type of food you have
selected. If it is, a message will appear on the display.
Allow the cooking compartment to cool down and start
again.

Information on the setting

The cooking result depends on the quality of the
■
food and the type of cookware. For an optimal
cooking result, use food that is in good condition
and chilled meat only.
The appliance chooses the optimal heating mode
■
and the time and temperature setting for you. You
will only be asked to enter the weight. It is not
possible to set weights outside of the intended
weight range.
When roasting dishes for which the appliance will
■
apply the temperature selection for you,
temperatures of up to 300 °C can be saved.
Therefore, make sure that you use cookware that is
sufficiently heat resistant.
Information is provided, e.g. on cookware, shelf
■
position or the addition of liquid when cooking meat.
Some food requires turning or stirring, etc., during
cooking. This is shown on the display shortly after
operation starts. An audible signal will remind you at
the right time.
Information on the right kind of cookware to use and
■
tips and tricks for the preparation can be found at
the end of the instruction manual.

Selecting a dish

The dishes are arranged in a uniform structure:
Category
■
Food
■
Dish
■
The following table lists the categories with the
corresponding food. One or more dishes are listed
beside each food.

Dishes

Chicken, unstuffed
Turkey breast
Roasting joint
Belly
Slow roasting joint
Top side, top rump
Leg of lamb, boned, medium
Meat loaf made from fresh minced meat
Goulash
Vegetable stew

Applying settings for dishes

You will be guided through the entire setting process for
your chosen food. Always touch the
Press the menu button.
1.
Use the rotary selector to select "Dishes".
2.
Touch the arrow.
¿
3.
The first dish will appear, along with a default value
for the weight.
Use the rotary selector to select the food you
4.
require.
Touch the arrow.
¿
5.
Turn the rotary selector to set the weight.
6.
Touch the arrow.
¿
7.
Information will be displayed on the best shelf
Note:
position, cookware, etc. to use.
Press the Start/Stop button to start.
8.
You will be guided through the entire setting process for
your chosen food. Always touch the
The setting has ended
A signal sounds. The oven stops heating. You can
cancel the audible signal early using the
If you are not satisfied with the cooking result, you can
increase the cooking time again. Touch the "Extend
cooking time" field. A cooking time is suggested. You
can change this if you wish.
If you are satisfied with the cooking result, touch
"Finish". "Enjoy your meal" appears in the display.
Cancelling the setting
Press the On/Off button. All settings are deleted. You
can implement new settings.
Setting a later end time
For some dishes, it is possible to set a later end time.
You can find out how to set a later end time by looking
in the time-setting options. ~ "Time-setting options"
on page 14
Once you have set an end time, the display shows the
waiting time. The status bar shows the time at which
operation is to end. None of the settings can be
changed. Please remember that easily spoiled foods
must not be allowed to remain in the cooking
compartment for too long.
Dishes
en
arrow.
¿
arrow.
¿
button.
0
27