Table of Contents
Advertisement
TROUBLESHOOTING
Replacing the Internal Barbecue Light
If the internal barbecue light is out, it might be time to change the light bulb.
1. Make sure that your barbecue is shut down, powered off, and
unplugged from the power source.
2. Using the included barbecue scraper, carefully pry the outside lens
from the barbecue light housing.
CAUTION: DO NOT USE A SCREWDRIVER OR ANY METAL TOOLS TO PRY THE
LENS FROM THE HOUSING. IT COULD CRACK AND BREAK THE LENS.
3. Gently pull the old light bulb from the socket to remove it.
4. With the barbecue light lens removed, gently wipe any dirt or dust
from the inside of the lens and light bulb socket using a lint-free,
non-abrasive cloth.
NOTE: Periodically wipe the lens with a damp cloth to keep the interior
barbecue light illuminating brightly.
5. Replace the light bulb as follows:
120V regions: 40W Halogen G9 120V
230V regions: 40W Halogen G9 230V
CAUTION: USE HALOGEN REPLACEMENT BULBS ONLY. DO NOT USE LED BULBS
AS A REPLACEMENT. IT COULD CAUSE COMPONENT DAMAGE OR FAILURE.
Using gloves or a lint free, non-abrasive cloth, carefully install the new
light bulb by gently pushing it into the socket.
CAUTION: DO NOT USE YOUR BARE HANDS WHEN INSTALLING THE NEW LIGHT
BULB. THIS COULD LEAD TO PREMATURE BURNOUT OF THE LIGHT BULB.
6. Reinstall the internal barbecue light lens onto the housing by gently
pressing the lens back onto the front of the housing.
A
38
B
C
D
E
Advertisement
Table of Contents
