Table of Contents
Advertisement
TROUBLESHOOTING
Continued...
14. Reinstall the rear access panel (M).
15. Reinstall the heat baffle, heat diffuser, FLAVORIZER bars and cooking
grates inside the cookbox (N).
16. Remove and clean any ash or grease from inside the ash and grease
system. Once cleaned, reinstall the drawer (O). Replace disposable
drip pans as needed.
17. Push the hopper slide door closed (P).
18. Open the hopper lid and fill the hopper with your choice of WEBER
SMOKEFIRE ALL NATURAL HARDWOOD PELLETS (Q).
19. Plug in, power on the barbecue, and begin a cooking session to allow
the controller to run diagnostics. If the E3 error code still remains on
the controller, contact the Customer Service Representative in your
area using the contact information on our website.
M
N
30
O
P
Q
Advertisement
Table of Contents
