Weber SmokeFire STEALTH EPX4 Owner's Manual page 34

TROUBLESHOOTING
Replacing the Glow Plug
Contact WEBER Customer Service at weber.com for a replacement glow
plug. To replace the glow plug, please follow these steps:
1. Open the barbecue lid and shutdown the barbecue by pushing and
holding the dial or using the main menu. Wait until the barbecue has
completed the shutdown procedure and completely cooled.
CAUTION: Do not unplug the barbecue or turn it off during the shutdown procedure.
2. Once the barbecue has completed the shutdown procedure and cooled,
power off the barbecue (A) and unplug from the power source.
3. Open the barbecue lid and remove the cooking grates, FLAVORIZER
BARS, heat diffuser, and heat baffle from the cookbox. B
4. From the rear of your SMOKEFIRE barbecue, remove the rear access
panel by removing four screws (C).
5. Unplug the glow plug shuttle wires from the back of the glow plug
shuttle (D).
6. Remove the screw that holds the glow plug shuttle in place and
carefully slide the shuttle out from the barbecue (E).
7. Remove the glow plug from the glow plug shuttle by pulling it out and
away from the shuttle (F).
A
B
34
C
D
E
F