Weber SmokeFire STEALTH EPX4 Owner's Manual page 17

WEBER CRAFTED Ready
Your SMOKEFIRE barbecue is WEBER CRAFTED Outdoor Kitchen Collection
Ready with the included grates and frame kit.
To setup your barbecue to use WEBER CRAFTED Grillware, please follow these
instructions:
1. Remove the cooking grate on the right side of the cooking box (A).
2. Place the WEBER CRAFTED frame on the right side of the barbecue (B).
It should be positioned with the wire looped feet facing down into the
cooking box. The frame rests on the ledge of the cookbox with the WEBER
logo facing up.
3. You are now ready to use your choice of WEBER CRAFTED Grillware (sold
separately on weber.com).
4. The spacer included with your barbecue is used only when cooking
with certain WEBER CRAFTED Grillware (sold separately on weber.
com). It creates a custom fit, seamless integration, and effortless
interchangability to give you great results. When in use, the spacer is
installed at the front of the frame with the two large tabs positioned
towards the inside of the cookbox (C).
5. When you are ready to use your cooking grate again, remove the spacer
(if used), and any other accessories from the frame and replace the
cooking grate on top of the frame (D).
Caring for Your Weber Crafted Frame Kit
• Use a barbecue brush or scraper to clean the frame kit.
• The frame kit is dishwasher safe, however, WEBER recommends
handwashing the frame using a mild detergent to extend the life of the
product.
• Throughly dry the frame kit before using it.
• With regular usage, the colour of the frame kit will change colour. This is
completely normal and will not affect cooking results.
• If you have any further questions, contact the WEBER Customer Service
Representative in your area using the info on our website, weber.com.
Look for more WEBER accessories on weber.com and discover
what's possible.
BARBECUE OPERATION
A
B
C
D
17
weber.com