Figure 3: Tbus-6 Connecting Surface; Table 1: Tbus-6 Table Connection Bus Features - Kramer TBUS-6 User Manual

# Feature
1 Connecting Surface
2 Black Anodized Lid
3 Mounting Plate Outer Rim
4 Enclosure
5 Height Adjustment Screws
6 Rubber Protectors
7 Locking Butterfly Screws
8 Mounting Brackets
9 Mounting Butterfly Screws
10 USB Sockets
1
11 Tie Holes
12 Protective Rubber Guard
Figure 3 and Table 2 define the connecting surface:
1 Some versions may not include tie holes
Your TBUS-6

Table 1: TBUS-6 Table Connection Bus Features

See Figure 3 and Table 2
Covers the connecting surface, leaving the table surface neat and tidy
Fits over the table surface
Inserts into the table cutout
Seven screws for adjusting the height of the connecting surface, three on
the front, and two on each side
Protect the table surface when mounting the unit (one on each side)
Tighten to lock the mounting butterfly screw (one on each side)
Fit in the bracket slits after inserting the enclosure into the table –
to secure the unit to the table surface (one on each side)
Tighten to secure the unit to the table surface (one on each side)
Receptacles for external USB cables
Anchor the self-locking ties to secure the pass-through cables to the
inside walls of the unit (8 pairs of holes, 4 pairs on the front and 4 pairs on
the rear panel)
Protects the mounting plate outer rim during shipping. Remove before
installing the TBUS-6

Figure 3: TBUS-6 Connecting Surface

Function
5