Connecting The Cables; Figure 6: Installing Tbus-6; Figure 7: Connecting The Cables - Kramer TBUS-6 User Manual

5.5 Connecting the Cables

To connect the cables:
1. Insert the cables into their appropriate connectors from underneath (see
Figure 7).
2. Secure the cables to the tie holes using the included self-locking ties.
Do not secure the cables too tightly or too loosely. Leave a small amount of
slack.
After the unit is connected to mains power and the proper cables, TBUS-6 is ready
for use.
Installing the TBUS-6 Table Connection Bus

Figure 6: Installing TBUS-6

Figure 7: Connecting the Cables

9