Brother DCP-7057 Service Manual page 335

APPENDIX 2 DELETION OF USER SETTING INFORMATION, ETC.
In this machine, the user setting information is stored in the EEPROM and flash memory of
the main PCB. You can delete all the data listed below at a time with the procedure given
below.
• Information related to Net
• User setting information
(1) Press the Menu button while the machine is in the ready state.
(2) Press the
LCD and press the OK button.
(Which will appear, "Initial Setup" or "General Setup", depends on the model.)
(3) Press the
OK button.
(4) Press the
OK button.
(5) The "1.Reset/2.Exit" will appear on the LCD.
(6) Press the 1 button, and the user setting information is deleted, and the machine goes
back to the ready state.
Note:
• The machine returns to the ready state automatically if no panel operation is
implemented for 30 seconds.
or button, then the "Initial Setup" or "General Setup" will appear on the
or button, then the "Reset Menu" will appear on the LCD and press the
or button, then the "All Settings" will appear on the LCD and press the
App. 2-1 Confidential