Cleaning The Device - urmet domus 1092/601 THERA 4 MINIDOME P/T/Z Instruction Manual

This function is used to monitor the environment at a 360° angle.
Simply adjust the camera angle using the "UP" and "DOWN" buttons keeping the panning speed for longer
than 3 seconds then enter "CALL+101+ON" to start the procedure.
Press any button "UP", "DOWN", "LEFT" or "RIGHT" to stop the procedure.
This function is used to resume an automatic action which was interrupted by the user after a
predetermined period of inactivity (Park Time).
To activate the function, press "PRESET+103+ON" on the control panel to activate the Repeat Last
function with 15s Park Time (i.e. 15 seconds will elapse between the end of the last action carried out by
the camera and the automatic beginning of the Repeat Last function).
Press "PRESET+103+ON" on the control panel to activate the Repeat Last function with 30s Park Time
(i.e. 30 seconds will elapse between the end of the last action carried out by the camera and the automatic
beginning of the Repeat Last function).
Press "PRESET+102+ON" on the control panel to turn the function off.
Important note: The previously described dome functions, except for the six programmable track tours
may be used by employ different control panels other than Ref.1092/620 or DVR.
Refer to the instruction of each product for how to access the functions.

CLEANING THE DEVICE


Rub delicately with a dry cloth to remove dust and dirt.

Dip the cloth in neutral detergent if dirt cannot be eliminated with a dry cloth alone.

Do not use volatile liquids (such a petrol, alcohol, solvents, etc.) or chemically treated clothes to clean
the device to prevent deformation, deterioration or scratches to the surface finish.
52
Setting 360° continuous pan
Setting Repeat Last function
DS1092-041C