Fujitsu ETERNUS LT140 User Manual page 73

Chapter 4 Considerations
4.1 Troubleshooting
Problem
The following error mes-
sage appeared on the
[Configuration > Encryp-
tion > LT Encryption]
screen.
"Import Export functional-
ity is only available using
secure HTTPS connection."
The following message
appeared on the [Configu-
ration of Encryption]
screen and the key man-
agement function cannot
be enabled or disabled.
"Note: Encryption configu-
ration changes cannot be
made while media is
loaded in any drive."
FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
Cause
Instead of an https connection, an http
connection may have been used to log
in.
The tape cartridge may have been
loaded in the tape drive.
73
Copyright 2019 FUJITSU LIMITED
Corrective action
Enable [SSL Secure Socket Layer] by selecting
the checkbox on the [Configuration > Web
Management] screen. After that, log out and
then log back in using https.
Refer
•
"2.1.2.3 Enabling SSL" (page 26)
•
"2.1.2.4 Connecting to the Remote Panel
after Enabling SSL" (page 29)
Check whether the tape cartridge is loaded in
the tape drive.
If the tape cartridge is loaded, move it from
the tape drive to the slot.
Refer
•
"3.6.1 Moving Media" in "FUJITSU Storage
ETERNUS LT140 Tape Library User's Guide -
Panel Operation-"
•
"3.7.2 Using Inventory Lists" in "FUJITSU
Storage ETERNUS LT140 Tape Library
User's Guide -Panel Operation-"
P3AG-3762-02ENZ0