Figure 2.10 Setting The Key Management Function; Figure 2.11 Default Setting Of The Key Management Function - Fujitsu ETERNUS LT140 User Manual

Chapter 2 Setup and Operation Procedures
2.1 Basic Setup
2.1.3.1 Basic Setup of the Key Management Function
This setting sets the key management function.
Procedure
1
Move to the [Configuration > Encryption] screen.

Figure 2.10 Setting the key management function

2
Apply the default settings of the key management function (for a new partition).
Select [LT Encryption (Licensed)] from the [Set Default Encryption Mode for new Partitions]
pull-down menu.

Figure 2.11 Default setting of the key management function

FUJITSU Storage ETERNUS LT140 Tape Library Key Management Function Option User's Guide
31
Copyright 2019 FUJITSU LIMITED P3AG-3762-02ENZ0