Table of Contents
Advertisement
Emulation Adapter
2.5
Demounting Lever
The demounting lever which comes with this product is used to remove the emulation adapter from the
base board or exchange adapter.
To remove the emulation adapter from the base board or exchange adapter, insert the demounting
lever alternately below all four corners of the emulation adapter and gradually pull the emulation
adapter out.
Point for caution on removing the emulation adapter:
R20UT4569EJ0110 Rev. 1.10
Sep.15.23
The four positions for applying the demounting lever
Figure 2-7
When you remove the emulation adapter from the base board or exchange adapter, take
care not to damage or deform peripheral components.
Names and Functions of Hardware
Side view
Top view
Demounting Lever
CAUTION
Page 18 of 58
Advertisement
Table of Contents
